Cold-formed components

The bulk of our turnover today consists of components manufactured according to customers' drawings. Key advantages of the cold-forming method are short cycle times and efficient use of materials. This gives us a competitive advantage over other manufacturing methods.
We manufacture everything from pins, shafts and rods to custom screws and parts with complex shapes that are difficult and expensive to produce using other methods.
We supply these parts in a variety of materials, often hardened and finished, which we naturally also handle.
Here are a few examples:

 

Welcome to send Your inquiry to us, at the bottom of this page, where You can also upload a drawing.

  • Show All
  • Skruvämne
  • Splinetapp
  • Hylsa med fläns
  • Presshylsa
  • Fyrkantskruv
  • Skruv
  • Trim Element
  • Ansatsnit
  • Distans
  • Distansbricka
  • Presskruv
  • Screw blank

    Material: 20MnB4.
    Supplied untreated.
    The through-hole and flanged head mean that cold-forming has major advantages here, since other manufacturing methods would require the removal of a large amount of material.

     

     

    spec skruvanmne

     

     

     

  • Splined stud

    Material: 16MnCr5.
    Supplied hardened.
    Creating splines by cold-forming is a very competitive process. The finished part is completed in the cold-forming press without the need for further machining.

     

     

    spec splinetapp

     

     

     

  • Sleeve with flange

    Material: C10C.
    Supplied finished with Fe/Zn 8 P5.
    The through-hole and flange mean that cold-forming has major advantages here, since other manufacturing methods would require the removal of a large amount of material.

     

     

    spec sleeve

     

     

     

  • Press sleeve

    Material: C10C.
    Press sleeve with through-hole and internal thread.
    Supplied blasted and finished with Fe/Zn 12 P1.
    The shape of the head and the through-hole mean that cold-forming saves material and eliminates machining of the head, which would be required with any other manufacturing method.

     

     

    spec trekkhylse

     

     

     

  • Square-head screw

    Material: 20MnB4.
    Supplied hardened and passivated with Fe/Zn-Ni 8 P5 T2.
    Cold-forming allows the square head to be created without material wastage, while thread rolling creates a strong and uniform thread, again without chip wastage.

     

     

    spec fyrkantskruv

     

     

     

  • Screw

    Material: 20MnB4.
    Supplied hardened and passivated with Fe/Zn-Ni 8 P5 T2.
    The shape beneath the head gives cold-forming many advantages here. The screw is completed in the cold-forming machine and requires no further machining.

     

     

    spec dogpoint

     

     

     

  • Trim Element

    Material: Aluminium EN-AW 6056.
    Supplied untreated.
    Significant material savings and longitudinal splines are features that strongly favour cold-forming in this example.

     

     

    spec trimming element

     

     

     

  • Shouldered rivet

    Material: C10C.
    Supplied untreated.
    Cold-forming minimises material wastage.

     

     spec ansatsnit

     

     

     

  • Spacer

    Material: 20MnB4.
    Supplied hardened and finished with KL100+2xSeal black GZ.
    Benefits of cold-forming include efficient use of materials, since the sleeve can be cold formed quickly and with minimal material wastage.

     

     

    spec distans

     

     

     

  • Spacer washer

    Material: 20MnB4.
    Supplied hardened.
    The through-hole and, to some extent, minimising material wastage, are factors that favour cold-forming of this component. The knurled surface is created during cold-forming, but could also be done in a subsequent machining stage.

     

     

    spec distance washer

     

     

     

  • Threaded stud

    Material: 20MnB4.
    Supplied hardened to grade 10.9 and passivated with Fe/Zn-Ni 8 P4T.
    The shape of the screw below the head and the elimination of material wastage both favour cold-forming. The shape below the head is particularly difficult and costly to achieve by any other method.

     

     

    spec presskruv

     

     

     

Skicka som pdf och ej större än 2MB

37

Back to top